Too many ideas, too little budget? Good iot use case prioritization means scoring each idea on business value and feasibility, then starting with the high-value, doable ones first. You can do it with one simple matrix.
This guide sits inside our wider iot business strategy coverage, so read it alongside the other planning steps there.
| Item | Value |
|---|---|
| Matrix scoring criteria | Business impact, technical feasibility, required resources and deployment timeline |
| Operating cost categories | Four categories: devices, connectivity, compute/storage and software license fees |
| Example annual loss from lost or stolen assets | $100,000 per year |
| Example reduction from an IoT alerting solution | 75 percent |
| Example value to the customer | $75,000 per year |
| Example SMART energy goal | 25% within 12 months |
The matrix criteria come from TechTarget’s IoT strategy guide, and the cost categories and dollar examples come from IoT For All’s use case evaluation article. The examples are illustrations, and figures can change, so check the sources before you rely on them.
Why rank use cases before you build
Leverege, writing on IoT For All, says too many companies start building before they ask whether the use case is any good, and they waste time and resources. Its test is short: a good use case works with today’s technology, creates significant value and costs far less to deliver than the value it creates (IoT For All).
TechTarget’s guide puts this step straight after you define business objectives. It says to pinpoint high-impact use cases and rank them on potential benefits and feasibility, and it notes that strategic use-case selection typically underpins a successful initiative (TechTarget).
William Schmarzo describes prioritizing by business value versus implementation feasibility as the final step of an IoT business strategy. His reasons are that use cases are not equal and that some are prerequisites for others (Experfy).
Ranking gives you three things:
- A short list of use cases worth funding now.
- A defensible order for the rest.
- A written record of why the others waited.
Score business value in money terms
Start by asking what solving the problem is worth to the customer or to your own operation. Leverege suggests estimating that value first, because it tells you roughly what anyone would pay.
Its worked example: a customer spends $100,000 per year replacing lost or stolen assets, and an alerting solution cuts those incidents by 75 percent. That gives $75,000 per year in value (IoT For All).
Not every benefit turns into a clean dollar figure, and at this stage a general idea is enough. Schmarzo adds that each use case should be described briefly with its business potential, its effect on key financial drivers, its implementation risks and a rough financial value over the next 12 to 18 months (Experfy).
Once a use case clears this first screen, a fuller iot roi calculation can test it with more detail. How you word the benefit for buyers is a separate job, covered in our guide to the iot value proposition.
Score feasibility and cost to operate
High value means little if you cannot deliver it. TechTarget advises evaluating each use case’s complexity and your organization’s readiness, then mapping it to technology maturity and starting with established technologies before emerging ones (TechTarget).
A practical feasibility check covers these points:
- Data availability: do you already collect the data the use case needs?
- Infrastructure requirements: what network and computing capacity must exist first?
- Skills gaps: who will build, install and run it?
- Technology maturity: is the approach proven or experimental?
- Operational complexity: how much hands-on work does each deployment take?
That last point matters because Leverege observes that many IoT solutions fail not because of the technology but because of operational complexity (IoT For All).
Check the per-unit economics early. Leverege splits running costs into four categories: devices, connectivity, compute/storage and software license fees, and it calls devices one of the largest cost drivers (IoT For All).
Take a $50 device and a customer who needs 2,000 devices. That is a total of $100,000 just for the devices, which is more than the $75,000 per year in value from the earlier example, so the use case loses money before any other cost is counted (IoT For All).
Build the value-versus-feasibility matrix
TechTarget recommends a use-case prioritization matrix with scores based on business impact, technical feasibility, required resources and deployment timeline (TechTarget). Here is one way to run it:
- List every candidate use case with a one-slide description of its goal, owner and rough value.
- Score each one low, medium or high on the four criteria, using the same scale for everyone.
- Plot value on one axis and feasibility on the other.
- Review the plot with the business stakeholders and adjust scores they can correct.
Reading the plot is straightforward. High value and high feasibility go first. High value but low feasibility needs groundwork, low value but high feasibility is a possible quick filler, and low on both can be dropped.
Do not let the scoring drag on. Leverege warns that companies can go too far the other way and fall into analysis paralysis, never selecting any use case (IoT For All).

Turn the scores into a roadmap
Schmarzo says the ideal output of prioritization is a use case roadmap, since some use cases are prerequisites for others. His example is that you must identify at-risk customers before you can run a retention campaign (Experfy).
TechTarget suggests focusing on proven, high-ROI applications first, and it names predictive maintenance, asset tracking and energy management systems as common examples (TechTarget). It also advises building foundation capabilities that support several advanced applications.
Attach a measurable target to each use case you fund. TechTarget’s SMART example is a goal to reduce facility energy consumption by 25% within 12 months using smart building systems and automated HVAC optimization (TechTarget).
Treat the roadmap as a living document. Schmarzo notes you may need to re-prioritize after your first couple of use cases are complete (Experfy).
Frequently asked questions
Do I need exact numbers before I score a use case?
Show answer
No. A rough estimate is enough to separate strong ideas from weak ones, and Leverege says precision is not needed at this stage of the process (IoT For All).
Who should take part in the scoring?
Show answer
Include the business people who are affected by each use case. Schmarzo’s validation checklist asks whether all business stakeholders have had a chance to review the use cases and have their voice heard (Experfy).
When should I revisit the ranking?
Show answer
Revisit it after you finish your first few projects. What you learn about real delivery effort can change a use case’s feasibility score and move it up or down the list.
What if a high-value idea scores low on feasibility?
Show answer
Keep it on the roadmap rather than deleting it. Look at whether an earlier, easier use case builds the data, devices or skills it lacks.
Is this guide tied to any vendor?
Show answer
No. It is independent educational content, not affiliated with the companies or authors it cites, and it does not offer services or bookings.
